Home > Exhibition > Content

Tent building skills and common sense.

Feb 26, 2018

Don't overdo it when you're in a tent, and it's likely to break the tent pole -- especially when it's cold, and it's best to carry around a 20-centimeter metal tube. In order to prevent the bottom of the tent from being damaged, it is necessary to clear the roots of branches on the ground before setting up.

When pulling on a rope, you can put a red cloth bar on it to warn others when they are not paying attention. Get in the habit of playing well even when there is no wind, or the tent will be easily blown away by the wind. When the wind is very strong, if you want to leave an empty tent, it is better to put the tent down and put heavy weight on it to prevent the tent from being damaged by the wind. If morning time permits, it is best to wait until the sun comes out to dry the tent, and the dry tent and wet tent will vary greatly in weight.

How to achieve the wind resistance of the tent, the first is whether its design is in accordance with aerodynamics. The typical tent is divided into a dome and a walkway. In comparison, the dome is tall and spacious, and the tent is short and narrow.

Although small, narrow means that uncomfortable to live in a but to blow winds come, it's the wind area is small, and fore and aft has extending outward design of the door of the tent, especially in parallel to the direction of the wind set up when the wind is very good. Another key to securing the tent is the overall strength of the tent. The material of the support rod is usually glass fiber and aluminium alloy, do not doubt of course is aluminium alloy pole strength is higher, and the number of supports is more the overall strength of the tent is higher. There are also tent pegs and pull ropes to make full use of the tent, which can greatly enhance the wind resistance of the tent.

Setting up a tent in the wind is a pain in the neck. Try to use natural barriers, such as mountain shelters and behind boulders. In the area of snow and ice, you can also consider digging a snow pit and then putting the tent in a snow pit, and then using the snow to build a wind-blown snow wall in the tent. In the process of building, the tent is blown away, and it will be held down by heavy objects such as big rocks or backpacks. It would be a test if, unfortunately, a single person was setting up a tent in the wind.

After each trip, go home to open the tent to dry in the ventilation, or the time will be moldy. Try not to wash the tent. If it is dirty, wipe it with a damp cloth. Avoid long bursts when placed.

The fabric of the tent may accelerate ageing; Avoid contact with chemicals

Don't overdo it when you're in a tent, and it's likely to break the tent pole -- especially when it's cold, and it's best to carry around a 20-centimeter metal tube. In order to prevent the bottom of the tent from being damaged, it is necessary to clear the roots of branches on the ground before setting up.

When pulling on a rope, you can put a red cloth bar on it to warn others when they are not paying attention. Get in the habit of playing well even when there is no wind, or the tent will be easily blown away by the wind. When the wind is very strong, if you want to leave an empty tent, it is better to put the tent down and put heavy weight on it to prevent the tent from being damaged by the wind. If morning time permits, it is best to wait until the sun comes out to dry the tent, and the dry tent and wet tent will vary greatly in weight.

How to achieve the wind resistance of the tent, the first is whether its design is in accordance with aerodynamics. The typical tent is divided into a dome and a walkway. In comparison, the dome is tall and spacious, and the tent is short and narrow.

Although small, narrow means that uncomfortable to live in a but to blow winds come, it's the wind area is small, and fore and aft has extending outward design of the door of the tent, especially in parallel to the direction of the wind set up when the wind is very good. Another key to securing the tent is the overall strength of the tent. The material of the support rod is usually glass fiber and aluminium alloy, do not doubt of course is aluminium alloy pole strength is higher, and the number of supports is more the overall strength of the tent is higher. There are also tent pegs and pull ropes to make full use of the tent, which can greatly enhance the wind resistance of the tent.

Setting up a tent in the wind is a pain in the neck. Try to use natural barriers, such as mountain shelters and behind boulders. In the area of snow and ice, you can also consider digging a snow pit and then putting the tent in a snow pit, and then using the snow to build a wind-blown snow wall in the tent. In the process of building, the tent is blown away, and it will be held down by heavy objects such as big rocks or backpacks. It would be a test if, unfortunately, a single person was setting up a tent in the wind.

After each trip, go home to open the tent to dry in the ventilation, or the time will be moldy. Try not to wash the tent. If it is dirty, wipe it with a damp cloth. Avoid long bursts when placed.

The fabric of the tent may accelerate ageing; Avoid contact with chemicals